-
### Describe your feature request
In our country, the grid is calculating electricity on 3 separate phases.
For example: Inverter is generating 3kW but if I switch on an 2kW appliance on one phase,…
-
**Is your feature request related to a problem? Please describe.**
It is not clear in the documentation when switch.predbat_iboost_gas is on what electricity rates are being referred to in
"When en…
-
Currently the battery is charged when the electricity price drops below a certain threshold.
If there's not enough solar energy available, it would be better to charge during the low cost hours and d…
-
Better manage the overnight charging along with Octopus tariff. In my case, Octopus Agile.
In the winter, it was 99% fully charged overnight so very little logic is required to managed the grid cha…
-
Is there a way to get the control to work when I don't send any electricity into the grid?
-
The electricity baseline (as of 2016) includes 68 product systems comprised of consumption mixes at the user level for 57 balancing authorities, 10 FERC regions, and the US.
These consumption mixes…
-
Impossible to add a any EM sensors on HA Energy Module -> Electricity Grid -> Add Consumption.
I see only 1p7k Lifetime energy
-
The output from "at grid; consumption mix" processes is 120 V, but should be Electricity, AC, 2300-7650 V.
A little digging revealed:
1. In run_net_trade() in __init__.py, "consumption mix" refe…
-
**Describe the bug**
For fossil_fuel_percentage the secondary_info does not show the result from template.
This worked fine in v0.1.8.1. After updating to v0.2.2 this is not longer the case.
Instea…
-
### Feedback
https://www.home-assistant.io/docs/energy/electricity-grid/#manual-integration says:
> Make sure you set and provide the device_class, state_class, and unit_of_measurement for those sen…
pohly updated
8 months ago