-
Hello,
Any chase to get XL6009 booster in Fritzing?
[http://s1.electrodragon.com/wp-content/uploads/2014/07/XL6009-Step-up-DC-Boost-ADJ-Module-4A-02.jpg](url)
And the datasheet [https://e-radionica…
-
Hello (and sorry if I am asking in the wrong forum)
Is there any documentation or hints on how to set up RTC for that [RGB LED Matrix Panel Drive Board from Electrodragon](https://www.electrodragon…
-
Hoy hemos puesto en marcha la pantalla de 5" siguiendo [este tutorial](https://www.elecrow.com/wiki/index.php?title=HDMI_Interface_5_Inch_800x480_TFT_Display).
Para que funcionase, hay que añadir l…
-
panel type: P2.5 FM6127 64 * 64
bonnet: https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
First of all, I would also like to thank you for all the work and the much …
-
```wchisptool -f blink.bin -g
Error while bulking in: LIBUSB_ERROR_PIPE
Libre CH551 Flasher 2018
The chip id 0x18 is currently not support in this program```
This happens on debian on a CH552T
…
-
If you've tested it and/or see any mistakes, tell me here.
-
Hi.
Thanks for the Particle library.
However, I recently tried the library with the receiver below, and at least where I live many of the strings from the device seems to be glonass, and start …
-
-
Hello!
In my home I have big HALL with 5x PUSH button switch
I want to use GPIO14 with a 5 PUSH button switch.
I install last version ( Sonoff and ElectroDragon by Theo Arends VERSION // 3.9.21) …
-
I have just tested this ready made active adapter board on a Pi3:
http://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
It works.
I'm using it with 18 64x32 P3 panels
![2…