-
Last week I completed the entire ```emane-guide``` and by the end I had everything working properly. This morning I went back into the guide to review the models and I found that some key elements are…
-
## Issue Description ##
I have enabled the printing of the metrics in srsue (by pressing "t") and I have seen that the EU detects a SNR of 40dBm in downlink; it also uses the MCS 2 and 16 respectivel…
-
## Environment:
Ubuntu 18.04
emane-tutorial 0.27
emane 1.2.6
GUN make 4.1
## Issue
Since there is no xml file such as rfpipenem.xml in the .emanegentransportxml directory In em…
-
```
Have a "defaults" or "remove configuration" button next to the "config
emane_ieee80211abg..." button in the Node Configuration dialog.
Another issue is clicking on the interface configuration af…
-
Errors like the following occur when building the develop branch on Ubuntu 16.04.1 i686 using g++ version 5.4.0:
```
eventstatisticpublisher.cc:115:49: error: call of overloaded 'Any()' is ambiguous
…
-
```
Have a "defaults" or "remove configuration" button next to the "config
emane_ieee80211abg..." button in the Node Configuration dialog.
Another issue is clicking on the interface configuration af…
-
```
Have a "defaults" or "remove configuration" button next to the "config
emane_ieee80211abg..." button in the Node Configuration dialog.
Another issue is clicking on the interface configuration af…
-
```
What steps will reproduce the problem?
1. create scenario with some MDR nodes linked to a WLAN
2. change WLAN to use EMANE 802.11 model
3. configure 802.11 MAC unicast rate of 54M
4. press start
…
-
Hello, I am having trouble getting opentestpoint probes to work with EMANE v1.2.5. Everytime I run [Demo 1](https://github.com/adjacentlink/emane-tutorial/wiki/Demonstration-1), the following errors a…
-
```
When cored.py is started from the /etc/init.d/core script with an EMANE
scenario, EMANE fails with:
"ABORT could not set sceduler to realtime"
http://pf.itd.nrl.navy.mil/pipermail/core-users/…