-
The kernel seems to be compiled without support for CANbus. Haven't been able to use a usb-CAN adapter. I can't seem to find available module to load, either. Would be great to be able to use it for m…
-
See install guide: [Klipper Installation](https://www.klipper3d.org/Installation.html).
It looks like I would need to use the [Ender 3 S1 config](https://github.com/Klipper3d/klipper/blob/master/co…
-
I'm working with the Sonic Pad so that i can use the Creality Ender-3 S1 CV-Laser Module.
So far i have managed to configure printer,cfg so that i can make macros to support the laser.
I got two…
-
I uncommented the section [bl touch] but klipper asks me to specify
control pin and sensor pin of the bl touch
and after I have this error:
"gcode command QUERY_PROBE already registered"
-
klippy.log show this
[ERROR] 2023-06-03 18:04:39,214 [root] [virtual_sdcard:_load_file:251] File opened:ender3v2/PowerShroudModUpdatedV2_2h25m_0.20mm_200C_PLA_ENDER3S1.gcode Size:800886 start_print…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
On the newest firmware after the first layer the nozzle temp drops from 205° to 198.xx° C (Shoul…
-
MARLIN-E3S1PROFORK-BYTT-v027
Ender3S1 PLUS F4 chip
the problem occurred with both abs and url firmware.
when i try to exit any section of the menu to the main menu, the back button does not wor…
-
>Note: Because some links were removed, this is the screen firmware that allows restore display functionality:
[Screen firmware.zip](https://github.com/mriscoc/Ender3V2S1/files/13825131/Screen.firmw…
-
**Describe the bug**
When levelling with a z-offset of anything other than 0, it affects the way the mesh is produced. Consistently reads one side MUCH higher than the other, seems to flip around fro…
-
i am now on my second f4 mainboard that is stuck with the last firmware flashed to it. i have updated it, with correct firmware along the way, now i cant change anything it wont flash anymore