-
i**Describe the bug**
A clear and concise description of what the bug is.stack
i bought Atomstack m30,i innstalled GRBL SOFTWARE.THE PROBLEM WITH MACHINE IS NOT ENGRAVING IN PROPER WAY,ONE TIME IS …
-
### Summary Description
After connecting the laser via USB and clicking **connect** in the **controller** window, the buttons to move the laser turn gray when hovering. It is impossible to move the l…
-
So I have a few questions (if I am posting this in the wrong forum, please redirect me to the proper place):
1. After digging through your code, I just wanted to confirm that this is for a 24x18 be…
-
### Possible Fixes
Yes
### Modpack Version
0.2.60
### What happened?
Phosphorus-doped Monocrystalline Silicon Boule cannot be cut down to 2nd tier Wafern. Recipe requires either water or lubrican…
-
Hi! i use this app to generate gcode to engrave pcb on laser engrave, and i need to edit gcode on text editor. can you add laser support?
-
I am trying to set up a laser engraver with the smoothieware firmware and config files provided on the skr v1.3 Github page. I have enabled the laser module and set the pins for enabling the laser alo…
jr-11 updated
3 years ago
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
[Engrave…
-
This is the error message I get after compiling the frame-engraver-test.ly and lyp test .
Lyp 1.3.5
GNU LilyPond 2.18.2
Processing `/tmp/lyp/wrappers/frame-engraver-test.ly'
Parsing...
/Users/m…
-
reported by Mark Knoop on 25.10.2018:
It seems that mixing editionMods with normal paths together with those formed with wildcards and/or regular expressions causes the wildcard/regex editionMods t…
-
Hi, I bought this board with the intent to modify an existing motion system to be used for a dedicated laser engraver/cutter. The SKR Pico has a dedicated laser port, but absolutely NO documentation. …