-
Gerald is engraving blurrily and with sparks. I seem to remember that this happened previously when the lens was cracked and needed replacing.
-
Hi there,
I'm trying to convert our laser cutter to grblhal with a pi pico in the picocnc board. I have it running, but still seem to have a problem. The problem is, that when I send a job contain…
-
### Feature description
In a project that I'm working on, there we could benefit from a feature where the user would be able to use same type of objectbrick twice on a data object.
**Example**…
-
## The error
```
Traceback (most recent call last):
File "create_tf_record_from_joint_dataset.py", line 109, in main
allow_sample_reuse)
File "create_tf_record_from_joint_dataset.py", l…
-
My Back Rune Divine Light can not be stored in a set.
It can also not be "Quick-applied" via right click.
It is also not warning me if this rune is missing (for other slots a warning is popping up, …
-
When starting the application I get this crash about once every 3 or 4 launch:
`/usr/include/c++/13.2.0/array:211: constexpr const std::array::value_type& std::array::operator[](size_type) const [wit…
-
I worked out a method for converting a grey scale bitmap into multiple binary bitmaps that when rastered on top of each other produce a 3D relief. I had intended on merging the code into K40 Whisperer…
-
Would it be possible to increase the image resolution (Quality) to 50 lines/mm?
I am currently using a laser which has a spot size that can be adjusted down to about 20-micron diameter. Thus having 5…
-
When engraving a bitmap, the movement speed drops very dramatically. I increased the accelerations to the maximum, but it didn't help. Obviously the limiting factor is the serial port buffer. Is there…
-
Hi I went in today for laser induction as I had hoped I could use them for a product I am working on.
To date I have been using a diode laser at home which has produced quality results albeit a bit…