-
Raspberry pi zero
Kernel: 6.6.31+rpt-rpi-v6
result of make
make -C /lib/modules/6.6.31+rpt-rpi-v6/build M=/home/victor/epever-upower-tracer/xr_usb_serial_common-1a-linux-3.6+
make[1]: Entering d…
-
### A clear and concise description of what the problem is.
I'm using five epever tracer and all of them is administered through a bridge (serialTCP) by tasmota and linux host with python tcpmodbu…
-
Hello,
I would like to include my two epever with your script on the Venus os.
The charge controllers are connected to another RaspberryPi and it already provides the data via MQTT.
What do I ha…
-
I use a total of 5 EpEvers, I would like to read the data from the 5 devices and send it to the IOBroker via MQTT. Is this possible with this? Or is only 1 EpEver supported?
-
Hi,
Unfortunately, this project almost does not work, because such an error constantly occurs:
``` $ ./logtracer.py
Traceback (most recent call last):
File "/home/pi/epever-upower-tracer/Sol…
-
I tried the library with the esp8266 to communicate with the Epever charge controller and with a few adjustments I even managed to establish a connection. However, the connection was rarely stable. As…
-
Hi,
How connect esp module to Epever ?
Do you have a schematic ?
Thank you,
Cristi
-
packages are installed with
sudo pip3 install -U pymodbus pymodbusTCP
but still it not works and means "not found"
using last raspbian
2022-11-13 10:42:20.650 Error: Epever Batt Volt: (…
-
Hi,
Please, one more question:
I am using a battery voltage widget for current data.
I noticed that when I set "last 30 days" or other value, the "Relative time ranges", the current readings cha…
-
Hello,
At first I want to thank you for this project. It works very well.
As I am new at these kinds of stuff I have a single question. At first: I use two EPEver Tracer 10415AN, combined with a EPE…