-
我最近把gpt_demo案例运行到我的es8388音频芯片的板子上,
板子原先是使用es8311芯片的,那时候程序运行都是正常的,
但是板子改成es8388芯片后(板子只有1个麦克风和2个喇叭),
唤醒的成功率非常低,大概30次才能唤醒1次,并且比较随机。
比较奇怪的是,唤醒后,我的语音每次都能准确识别(大概6,7次全都是成功的),并且TTS语音播放也都是很正常的。
现在主要的问题就…
-
I have a Esp32 Audio Kit 2.2, and I have no sound.
I uncommented #define BOARD_ESP32_AUDIO_KIT_ES8388 and add #define ESP32_AUDIO_KIT
I connected MIDI keyboard, and when pressing keys, red LED is fl…
-
Thank you for this component and your efforts, really appreciate.
### Hardware:
DAC: es8388
Board: AI-Tinker ESP32-A1S
### Problem 1: Audio output is much too slow
Audio output of the media…
nighi updated
2 months ago
-
Hi,
New issue. I just found out that I have probably a audiokit board with the es8388 codec instead of the AC101. I know that the manual says that the software only works with the AC101 codec. Is t…
-
Hello,
I try to use my ESP32-LyraT 4.3 to send sound to Bluetooth headset from line input.
Actualy ESP-ADF library enable line input only when sound card is initialized with :
```c
audio_hal_ctr…
jujax updated
1 month ago
-
Hi,
I have a new board (ver 2.3) with new codec
when I setDeviceType(DT_ESP32_A1S_ES8388);
the board going to exception :
> Core 1 register dump:
> PC : 0x400d1d7f PS : 0x0006053…
-
Does anyone know the configuration for recording and playback from the line-in jack - without having the microphones active also. That is short of desoldering the microphones?
-
### Describe the bug
When I set bt_sink_pin to a specific pin and then i try to pair from my phone to the ESP32 running Squeezelite i don't have to enter the pin to pair.
### Preliminary Informati…
-
Hello,
I set all registers of the ES8388 to output max volume but the playback through the headphones is not loud enough. I got the ESP32 Audio Kit V2.2 2957 with ES8388 Codec and the old variation w…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…