-
The JC2432W328 ESP-32 2.8" web flasher successfully uploads code, but the display remains black. This issue persists despite multiple attempts. Tried all of the possible Marauder versions in the web f…
-
Ethernet with the Wiznet W5500 Ethernet Board
set up a static ip address and select ethernet instead of wifi in the webinterface
![image](https://user-images.githubusercontent.com/61190758/9995…
-
Hi Team,
I have flashed " esp32-ota-20220117-v1.18.bin " to my esp32 with 4MB flash device, After flashing it it took almost 1.5 MB for firmware partition and rest for others as per given below par…
-
### Board
ESP32 Dev Module
### Device Description
ESP32 Dev Module
### Hardware Configuration
ESP32
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE
### Operating Syste…
-
Hi..ist es 1:1 auch möglich einen ESP 32 zu benutzen
Gruß Dirk
-
My testing code is basically same as the RMT example , but remove the final `PulseCode::default()` from data. And some logging and delay are added.
It turns out that as long as I remove the final …
-
### Is your feature request related to a problem?
I am using ESP-WROOM-32 and ESP-IDF. I have created project using this example: examples/bluetooth/bluedroid/ble/ble_hid_device_demo
this example…
-
Hello there, could someone please help me to connect and give me a code example?
i have my esp-wroom-32 and my 8pin cc1101 (EO7-M11010) and i want it to receive 433.92 mhz signals
i tried every sing…
-
Hi,
What have I missed if I get this:
Husqvarna Automower BLE
0.0.9
Unknown Automower
Failed setup, will retry: Data length mismatch. Read 28 bytes of 24
[16:21:00][D][esp32_ble_tracker:27…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…