-
### Question
I want to create a custom attribute to display rfid card_id into a zigbee attribute with esp32-H2.
### Additional context.
Currently i am blocked on the definition of the custom at…
-
esp-rfid latest dev branch. It keeps disconnecting from mqtt and this results in home assistant thinking the door is open.
Rebooting the esp solves the problem temporarly. The disconnects seem to be …
-
C:\Users\user\AppData\Local\Arduino15\RemoteSketchbook\ArduinoCloud\111514355832011092383\esp_google_sheet_rfid\sketch_jan22a\sketch_jan22a.ino:218:14: error: 'class BearSSL::WiFiClientSecure' has no …
-
Hi chaps, not really an issue - I made a youtube video showing how to implement ESP-RFID
[see here](https://www.youtube.com/watch?v=jKuAQTV5Fts)
enjoy.
-
Is it possible to hook up the modules like RFID sensor CC1101 and oled display with raspberry piko w board and connect ESP 32 as well with wires and program both board separately by using their USB po…
-
https://github.com/rfidtool/ESP-RFID-Tool
-
I don't know if you have seen this one. It's much better pinout. Suitable for RC522 and other modules.
> ESP-RFID Relay Blue Board
>
> Because it was often requested, we made another version. Mu…
-
I bought the esp-rfid Blue Board and powered it on and no Access Point to connect showed up. I flashed the firmware once again , still no AP. Is the board broken or am I missing something ?
Regards …
-
**Repository**: **[omersiar/esp-rfid](http://github.chaintip.org/omersiar/esp-rfid)**
**Issue [#114](http://github.chaintip.org/omersiar/esp-rfid/issues/114)**: **Led and Buzzer Support**
Hi. Can you…
-
hi folks!
direct (no downshift)
gpio 0 = w0
gpio 1 = w1
GND united
hikvision DS-K1101MK reader in mode 34 wiegand , uses mifare ultralight rfid, always receive 52 bit data (stable same but n…