-
**Describe the bug**
A clear and concise description of what the bug is.
connected a ssd1306 display to a esp-s2 board and its was not working.
**To Reproduce**
Steps to reproduce the behavior:
…
-
For some reason, [S2 HIL](https://github.com/esp-rs/esp-hal/actions/runs/10717649673/job/29718015468) is failing this test, I can also reproduce it locally. Not sure why it only happens…
-
> ESP32-S2/S3 chips have built-in USB-OTG peripherals, which support USB host mode.
I specifically have a ESP32-S3-USB-OTG board that I would like to use as a USB host.
I think [`esp-rs/esp-idf-…
-
### Failing/Disabled Tests
- [ ] ESP32: `qspi_read` reads only zeros
- [ ] ESP32: `qspi_write` test doesn't make sense on ESP32, panics [here](https://github.com/esp-rs/esp-hal/blob/main/esp-hal/…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Ran into some kind of strange stability issue with my T211 meter. After a few hours the ESP32 device (Wemos S2 Mini) hangs and disconnects from Wifi. Only way to resurrect it is by power cycle the mic…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
Does marlin support ESP-S2?
### Describe the feature you want
Hello ever…
-
When trying to flash an S2mini via install.openepaperlink.de with the "Tag Flasher" the following error message appears 99% of the way through the process:
Installation failed
⚠️
Timed out waitin…
-
Hello all who may find this.
After obtaining the code provided in the other issue - https://github.com/Mottramlabs/ESP32-4-Channel-Mains-Current-Sensor/issues/1
I noticed that the ADC provided w…
-
### The problem
Since around 2024.04 two configured UARTs on a S2 Board will fail to boot.
It was working OK until 2024.03.
It is working with Arduino IDE
If either of the two UARTs is removed…