-
The ESP-WROVER-KIT development boards are End of Life (EOL). Is there a new development board that can be replaced?
-
Hi,
Thanks for the research and work done on this regard.
I need to do a bit of bluetooth testing at home so I headed to mouser to get the hardware needed. The following is what I found.
As you …
-
## Environment
- Audio development kit: ESP32-LyraT
- Audio kit version (for ESP32-LyraT/ESP32-LyraT-Mini/ESP32-S3-Korvo-2): v4.3
- [Required] Module or chip used: ESP32-WROV…
-
Hi
I'm new to using platformio but am struggling to upload to an esp-wrover-kit board. I've updated the board on the esp32 profile to esp-wrover-kit and I can see my device being detected on COM13.…
-
Hi,
I've recently tried debugging with an ESP-WROVER-KIT device
this is a plain ESP32 with a UART/JTAG IC
I don't expect this to work currently based on what's mentioned in the other issues also …
-
Did not work with default settings. The following works:
```
// ** Set the correct configuration for ESP32-WROVER-KIT v3
// --------------------------------------------------------
//#define DE…
-
**Describe the question/query that you have**
After flashing and monitoring the controller example onto my esp32-wrover-e kit, I am trying to commission the controller and connect it to Alexa but the…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
What is correct way to configure ESP hosted for 3rd party BTStack operation via VHCI? At the moment it supports NimBLE only.
But i want to use BlueKitchen BtStack which uses esp_vhci_host_... APIs t…
-
### Board
ESP32-Wrover-E
### Device Description
ESP32 Wrover-E, 8MB psram, 16mb flash
### Hardware Configuration
Lan8720
psram
i2c
spi
### Version
latest master (checkout manually)
### IDE …