-
Hello will the ESP32-8048S070C Version supported ?
-
Can this project also work on ESP32-8048s070C? It has an ESP32-S3 microcontroller, a 7-inch capacitive touchscreen display, and a built-in i2C audio amplifier.
-
hi.....i got the following error on my terminal after successfully building and flashing the code can you please assist me regarding the same?
I (258) cpu_start: Max chip rev: v0.99
I (263) …
-
Firstly What a great Project I love it :) How do I contribute some cash to say Thank you.
The problem I am experiencing is when I run only the LGVL Portion nothing else.
At startup, it works fine.…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the iss…
-
SPI
Two separate SPI busses are being used for the display and the touchscreen.
spi:
- id: lcd
clk_pin: GPIO14
mosi_pin: GPIO13
miso_pin: GPIO12
- id: touch
clk_pin: GPIO…
1achy updated
4 months ago
-
### The problem
I am attempting to configure the RPI_DPI_RGB display driver for the ESP32-8048S070 development board. This has an ESP32-S3, 7 inch RGB display, GT911 touch screen and a plethora of ot…
-
So I've got a ESP32-8048S050C display board. I tried to load this project but all I see is white screen (backlight is working) but nothing shown (no GUI etc). Touchscreen works.
What's the issue? I…
-
Hello great code!
I used it for two esp32-displays : esp32-2432S028R and esp32-8048S070C. For the first one, it works beautiful. But for the second one, code compiled but gave no display. Looki…
-
The Euro sign (€) is displayed on the info screen as a box.
Also other sign like superscript 2 -> ² and mu -> μ
Any idea for a solution?