-
Hi
Is it possible to compile a build for ESP32 S3 ?
Thank you.
-
I suggest that we add the ability to forward ports via the web interface and have the ability to scan for Wi-Fi networks via the serial console and web interface. Because the router could be remote an…
-
I remember trying this firmware a few months ago and can get up to 15mbps, but now i barely reach 3mbps with average speed about 1mbps. My board is ESP-32 Devkit v1
-
Hi Martin, I am referring to previous issues #118 and #119 and your suggestions
>You can disable NAPT using the lwip function "ip_napt_enable(u32_t addr, int enable)" for your interface.
I did man…
-
@martin-ger
Firstly apologies for hijacking the previous thread with my Q's and pestering lol
Would it be possible to send Temperature & Humidity data per room in my house and one for outdoors …
-
**Describe the problem you have/What new integration you would like**
It would be nice to enable a range extender using and esp8266 and esp8285, by pressing one GPIO, i am able to enable the func…
-
Hi,
Excellent software you have there, I'm using it outdoors as an experimental mesh with low cost nodes unfortunately the batteries don't allow me an unlimited run time.
![img_20180109_225030](…
-
I am trying to setup the wireless camera over 2.4ghz access point on 3200ACM running openwrt r6302/r6365 using the latest driver on 3200ACM with all the possible encryption and channels but it just fa…
-
I tried both versions, the original of the Martin Ger
and this one
And this one works much slower (9mbit vs only 3mbit), regardless of bandwidth settings etc, at exactly same location etc.
I use pr…
-
Thanks for the 1.1.3 release. Nice work!
On updating, I connected mine to another STA and noticed this...
STA password must have URL encoding if spaces or some other characters involved. Spaces mu…