-
I've recently purchased come ESP8684 WROOM-01C-H2 [1] and tested its compatibility with AY-WiFi.
While it's pin-compatible with ESP12E, it requires rebuilding esp-at firmware to use UART with TX on…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
And now only recognize 2MB space,before can recognize 4MB
```
Using 26MHz bootloader
App/part. size: 479,184/2,031,616 bytes, 23.59%
```
## espflash v3 log
```
xiaguangbo@debian:/med…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.0-beta.3-29-ged5591c5cb on 2024-06-14; NodeMcu-ESP32-C2 with ESP32C2
# Aka latest as of the time of writing
```
### Code/REPL
…
-
### Describe the problem
compilation of a sketch for esp32c3 boards gives the following error:
`Error during build: fork/exec /home/pi/.arduino15/packages/esp32/tools/riscv32-esp-elf-gcc/esp-2021r2-…
-
I have reinstalled 5 times activating only ESP32-S3, ESP32-S2 and ESP32-S3, ESP32 and ESP32-S3, all ESP32 series and whatever the case, it is always the same result: in IDF target menu of Espressif ID…
-
wget download become very low suddenly,and cannot recover again
version: base on commit d29c683468634c4bb87d8bf2df9023fd96e21630
linux version: 5.10.186
-
### Answers checklist.
- [X] I have read the [Rainmaker documentation](https://rainmaker.espressif.com/docs/get-started.html) and the issue is not addressed there.
- [X] I have updated my IDF bran…
-
I'm using the following command in all of my experiments.
```
esptool.py --port /dev/ttyUSB0 chip_id
```
and ESP32-D0WD (revision v0.0).
If I use the stub from the latest release (v0.2.0) then …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…