-
### Describe the bug
For several days, ESPHome has been losing all paired devices., the MQTT room that is set by cfilecode is working, but the devices lose their assigned names after being paired w…
-
### The problem
I set some esp8266's with temperature sensors and decided to change the name (aka the location) of the device in EPSHome. I had not yet added any of them to Home Assistant (in fact it…
-
Using a longer username will cause esphome device to reboot at "D][awox.connection:251]: combine mesh name + password:" step.
[23:06:31]abort() was called at PC 0x402128a3 on core 1
[23:06:31]
…
-
Hello i tried to install the code via esphome dashboard. But every time i try it i get errors.
My first try was
`substitutions:
# all substitutions for this project
espidf_version: 5.3.0
…
-
### Describe the bug
After setting up ESPHome, plugging in the device to the server and configuring its yaml configuration, trying to install it causes a compilation failure with this error:
```co…
-
I have been struggling with this for quite sometime. Many posts exists concerning ESPHome WiFi connection issues resulting in "EOF received" and "Connection reset by peer" messages in HA logs when usi…
-
### The problem
When performing the update to ESPHome 2024.5.0 for my Arlec PC191HA smart power plug devices (which use WB2S board) I noted several warning messages scroll past
### What version…
-
Hello,
Is there any chance to add Heltec/Neey balancers over BLE ? As far as i know ESPhome already support those devices:
https://github.com/syssi/esphome-jk-bms/blob/main/components/heltec_balance…
-
### The problem
Hello esphome community!
I have to warn first that maybe this problem is not related directly with esphome.
I have like 15 esphome devices added to esphome addon in Home Assistant…
-
### Feedback
Hi,
I am trying to add the menlor BT 2 Zone device using a ESPHome Bluetooth Proxy but it is not working. I am not able to get it discovered.
The device is not connected to anyth…