-
Initially, these don't have to have validators attached to them, but function as a fourth backing EL in addition to Nethermind, Erigon, and Geth.
To facilitate syncing, it can be provided by a comb…
-
For virt-intall tool. we always set the nic with eth0 eth1 eth2...
but with kcli, centos series which begin from eth0. but ubuntu/debian which are begin from ens3 ens4
so , can we unify the nic nam…
-
Disabling DHCPv6 is disabling SLAAC also
Disabling DHCPv6
curl -k -H "Content-Type: application/json" -H "X-Auth-Token: ${bmc_token}" -X PATCH -d '{"DHCPv6": {"OperatingMode" : "Disabled"}}' http…
-
Is it normal or abnormal for the network port team `roundrobin` mode to bind ports that are not connected to the network cable to cause a decrease in traffic? （at libteam1.31~1.32）
for example（use …
-
The development of [nimbus-eth1](https://github.com/status-im/nimbus-eth1) is ramping up, and for that reason we will need to perform benchmarking of the process of importing the network state data wi…
-
I use two different isp with very different connection speeds.
My setup is:
eth0 - local
eth1 - DLS Down 80 Mbit / Up 35 Mbit
eth2 - Cable Down 1000 Mbit / Up 50 Mbit
The aggregation of the u…
3dzug updated
22 hours ago
-
Hi,
In our phyGATE Tauri-L a ticket recently arrived with the following remarks :
> Test case:
>
> - configure both eth 0 and eth1 with DHCP
>
> - connect only eth0 to a DHCP serv…
-
```
[2024-10-10T13:23:21.324+00:00] [INFO] [fork_choice_control::storage] latest state checkpoint was not found; attempting to find stored state by iteration
[2024-10-10T13:23:21.324+00:00] [INFO] […
-
**Describe the bug**
On start-up eth1 module does a lot of fetches for apparently very little data
```
Sep-07 14:07:48.349[eth1] verbose: Fetched eth1 blocks blockCount=1, fromBl…
-
*anonopenwrt:*
Device: FriendlyARM NanoPi R2S
Openwrt version: 21.02
kmod-usb-net-rtl8152 version: 5.4.143-1
Under load the rtl8152 usb->ethernet controller periodically resets, resulting in los…