-
```
What steps will reproduce the problem?
1. Open text console
2. run 'xgamer -c /usr/games/etracer'
What is the expected output?
Etracer starts up
What do you see instead?
Gtk2 error
What vers…
-
Action: Install "Extreme Tux Racer" from mintinstall (Software Manager)
Expected Behaviour: Buttons appear "Launch" and "Remove"
Result: PASS
Action: Click "Launch" for Extreme Tux Racer in minti…
-
### Problem Overview
#### Refresher on Interrupts
- The problem is a conflict between the SoftwareSerial library packaged with the Arduino IDE and the SDI-12 library.
- Both libraries use pin change …
-
### Is your feature request related to a problem? Please describe
The ability to consistently land larger, heavier quads such as X8 quads and loaded cinelifters.
### Describe the solution you'd like…
-
Az etracer-0.8.1 az nvidia-340 meghajtóval kiakasztja az X szervert, nem ad képet, csak zenél. Csak erőszakkal lehet kilőni: killall etr. A nagyobb nvidia sorozattal jó.
A régi 0.7.5.1 verzió teljese…
-
IRC request there https://ghost.ced117.net/etracer_libera_migration.txt
-
### Describe the bug
I tested a few new PID settings with a custom gyro filter I wrote, based on the Betaflight firmware's recent branch. The drone started losing control so I disarmed the drone, bu…
pjpei updated
2 years ago
-
Using msp_displayport, when the number of osd elements is too large, fixed types of osd elements will be lost. Baud rate 115200.
My FC does not work as shown by etracer. When more than a dozen osd …
-
Bug description:
I recently bought an MATEK F722-SE Flight controller. When I plugged it into the computer, betaflight recognized the barometer. Then i decided to update the firmware from 4.2.2 to 4.…
-
### Is your feature request related to a problem? Please describe.
It would be beneficial to allow easy switch based profile switching for the full parameters which impact flight performa…