-
Hello! First, thank you for SatDump, it is an incredible piece of decoding software, and makes SDR's a lot if fun! I recently updated SatDump to v1.2.1 and found a few issues compared to the last vers…
-
I'm using an Ettus N210 on an M2 mac and had some build issues with the upstream project. I fixed them and made a PR... well, I think you know where I'm going with this.
I just wanted to check - ar…
-
Hi,
I follow the instrument to rebuild the X411 project, and try to many times, but block in fetcher the bmap-tools-3.5. when I check the bmap-tools_3.5.bb file， I thank this is due to the old git m…
-
## Issue Description ##
I am using `rfnoc_modtool` to create an oot module called `core` and a block called `square` (squares the IQ data).
When doing this, there are a few issues that caus…
-
Hello @platini2.
Hoe you're doing great. Please i order the USRP B210mini libreSDR, but i am facing some issues to make the radio up and running.
1. Anytime I start my VM, and I connect the device,…
-
Hello,
I have been playing with `suscan` and remote viewing with SigDigger and found that when running `suscan makeprof` only one profile is created for my USRP (an X310 with two UBX160 daughter bo…
-
Good Morning, thank you for the excellent article and associated repo for capturing droneID radio traffic.
I was also under the impression that DroneID was encrypted. There was a POC last year in Ot…
-
## Issue Description ##
This issue concerns the transition from the deprecated rfnocmodtool to building custom OOT modules for newer versions of UHD and GNURadio. Previously (UHD v4.4 , gnuradio …
-
As a user, I would like to be able to sweep frequencies using an Ettus B200 USRP at a performance level similar to what can be done with RTL HW using the rtl_power_fftw. Sweeps with the B200 USRP usi…
-
I used this config file:
https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
I'm getting navigation data but no location, also some lock loss. I noticed…