-
Hi, I'm writing an Eurorack module for clock generation and division and wonder if I can sync my module that uses uClock to an external trigger coming from another Eurorack module.
The input trigge…
-
Hello there ! is it possible to have the Waveforms Engine to be updated to the this alternative cool firmware code from Braids Renaissance ( https://burns.ca/eurorack.html ) for its new great modes
C…
-
```$ erbb setup --with-max-support
Extracting msys2_mingw64.zip...
Extracting kicad_minimal_windows_6.0.11-0.tar.gz...
Extracting gcc-arm-none-eabi-10.3-2021.10-win32.zip...
Adding Max support...
…
-
Create directory structure
```
firmware
firmware/arduino
firmware/eurorack-blocks
hardware
hardware/guitar-pedal (?)
images
```
-
Hi, the PSU connector is reversed wrt the eurorack standard. Pin 1 should be -12 V and pin 10 +12 V (https://division-6.com/learn/eurorack-power/ and https://doepfer.de/a100_man/a100t_e.htm).
In your…
-
Hi,
I am trying to upload third-party oscillators using logue-cli to a Minilogue XD on Linux. Unfortunately, I seem to get different symptoms consistently for different respective oscillators. One sy…
-
In https://github.com/apfelaudio/tiliqua/pull/38, I modified a whole bunch of things to add support for the -25K LUT SC variant. This included modifying the PLL configuration to use 2 PLLs instead of …
-
I've been meaning to ask this for a long time, not sure if I asked and then forgot about it so apologies if you've already answered on another repo...but...
Would it be possible to add a status on th…
-
looking for a beefy PSU and found yours. Before I build it and burn down my house, has it been built / tested yet?
Looks like the answer to all my prayers!
Cheers
-
Standard practice is to have the -12V pins of the power header facing the bottom of the PCB (ie, red stripe down). The fact that the -12V pins are facing the top and there's no stripe on the PCB to de…