-
Hi, I'm trying to get modeminfo to work with Sierra Wireless EM9191 I can see partial information on Network tab and nothing in Hardware tab (see attached) however, with mmcli I can get everything.
`…
-
Hi i have a 4g dongle the model is 4g-UFI-0CD5 i use the files here
1->i descompress base.zip
2-> cd base
3->./flash.sh
4->later download debian.zip
5->cd debian
6->flas.sh
after thata rest…
-
Hi,
I have a board labeled like: UFI003_MB_V02
WIth basegeneric + debian (with boot-ufi001c) and with firmware-ufi001c in /lib/firmware this is my modem state:
```
root@openstick:/# mmcli -m…
-
## Expected Behavior
OMR works perfectly with the ZBT Z8102AX with two 5G modems(Quectel RM520N-GL).
## Current Behavior
I have two 5G modems in the ZBT Z8102AX-T, which I configured with ModemMana…
-
Thanks again @abrasive for your great hack to switch the modem to USB mode!
In my case the modem does respond properly to AT commands.
BTW, do I need the command `at+gtusbmode=7` you gave? At leas…
-
![20231126_072935](https://github.com/OpenStick/OpenStick/assets/174009/3fa8740f-3397-4885-914d-477e54f5af82)
![20231126_072920](https://github.com/OpenStick/OpenStick/assets/174009/bca15328-11f6-40f…
-
My issue is with the SIM7076G, where I am trying to connect to a MQTT broker.
The root cause seems to be, that I am not able to start the MQTT service with AT+CMQTTSTART. No matter what I do, it re…
-
在我更新设备之前它工作正常,但之后它无法检测到卡:
root@openstick:/# mmcli -m 0
-----------------------------------
General | path: /org/freedesktop/ModemManager1/Modem/0
| …
-
Hii I able to install Debian into my 4g stick by following [the tutorial](https://extrowerk.com/2022-07-31/OpenStick.html).
but after the installation I could not able to access the shell via ADB, …
-
I just used the following code: [https://github.com/0015/ThatProject/blob/master/Cellular/T-SIMCAM/01_T-SIMCAM_ImageUploader/01_T-SIMCAM_ImageUploader.ino](url) with the T-SIMCAM and the SIM7600G-H m…