-
Hi,
I know there were discussion in the past around the eVPN model and see the placeholder for L2VPN in "bgp/openconfig-bgp-common-multiprotocol.yang". Is there a topic I can look up that captures…
-
BRCM HLD https://github.com/sonic-net/SONiC/pull/1622
Cisco HLD https://github.com/sonic-net/SONiC/pull/1638
Eventual goal is to combine the two HLDs into a converged HLD
-
We need to test that we can use EVPN VXLAN with non-Juniper hardware vendors such as Cisco and Arista.
-
-
### Enhancement summary
When trying to configure EVPN all-active GW the following ESI is defined under address-family evpn:
https://www.arista.com/en/support/toi/eos-4-29-0f/16349-evpn-vxlan-all-a…
-
### Issue Summary
We have a setup where l3leaf switches are providing uplinks to hosts and l2leaf switches via EVPN multihoming. The l2leaf switches are using LACP portchannel to connect to the l3lea…
-
### Description
I'm attempting to use FRR as a route reflector for our EVPN/MPLS/ISIS-SR network.
It seems to be losing the label for type 1 circuits and sending 1048575 instead (binary 1111111111…
-
https://github.com/openconfig/public/blob/ed650bd969afc2eb5f66d60b86b62ffa6fd5fb8e/release/models/network-instance/openconfig-network-instance-l2.yang#L309-L312
as mentioned in a description the le…
-
- code dup
- ci failed
- no tests
- no godpu usage
- readme removed badges
- readme : i want to contribute section must stay
_Originally posted by @glimchb in https://github.com/…
-
### Description
When you announce both IPv6 and IPv4 routes in the BGP-EVPN, and then withdraw all routes of one of the families, routes from the other family become unreachable from other hosts that…