-
Unfornuatly same bug like in the original version. If you try to panalize the excellon you get this error mesage:
`New object with name: Gerber_BottomLayer.GBL_panelized. 0.177734 seconds executing…
-
How do I specify integer and decimal places while reading an excellon file?
-
The test file from #93 also confuses gerbv's Excellon format autodetection. All coordinates in the file have several leading zeros, so it should be obvious that trailing zero omission was used, yet, g…
-
TSCircuit is a TSX interface for designing schematics and PCBs.
Each TSX component eventually renders down to a builder.
```ts
export const Resistor = () => {
return {
return grou…
-
I would like to add support for opening gerber files, because flatcam does not really work with KiCad gerbers for me and i have to fix the g-code in bCNC anyway.
Opening excellon files might be opt…
-
Add an extension point to support importing from non-svg file formats via plugins
- Gerber / excellon
- G-Code
-
Hello,
Maybe I want to convert a proxxon MF 70 to CNC. I will design the PCB with eagle and make it with etching technology. I think grbl is a good solution to drilling the board, isn’t it?
Therefor…
if2s updated
10 years ago
-
"It is recommended to reduce Feedrate Z to 60 (300 may be too high and could cause damage to the board). Adjust Cut Z to a value that will completely drill through the board. If using the provided fix…
-
gerbv does not parse the type of tool definition Allegro exports, and will render files using these tool definitions using some (incorrect) built-in defaults. Example file: [drill.zip](https://github.…
-
It happens when I have 'textures' in the model of one of my footprint
Included below a link to the step file I think is causing this error
https://raw.githubusercontent.com/bzhmaddog/lamp-matrix…