-
**Describe the bug**
Hi,
Every Windows startup and when FanControl starts, the GPU curve doesn't work. When I check in AMD Adrenalin, GPU Fan control is by default. If I switch from GPU curve GPU …
-
Feature suggestion: Fallback Fan Curve
Background:
Many GPUs support a 0 Rpm mode in which its fans turn off. However, this mode is disabled on a hardware (or driver) level if certain condition…
-
### Checklist [README]
- [X] Device is not undervolted nor overclocked
- [X] Device is using the [latest drivers](https://github.com/IGCIT/Intel-GPU-Community-Issue-Tracker-IGCIT/wiki/Intel-driver-up…
-
**Describe the bug**
I'm having trouble setting up my fan curves. I have set `minPwm`, `startPwm` and `maxPwm` for each fan, but fans are still getting initialized on every run, and the curve values …
-
Here’s how I do it：
I installed bazzite following the instructions in a YouTube video
I installed decky loader in desktop mode
Then I installed the hhd decky plugin
I set up a custom fan curve i…
-
## `HEATUP`/`COOLDOWN`
The rapid and sudden spin-ups of fans on System76 laptops seems to be a common complaint in reviews for some models. Thankfully, this should be somewhat largely addressed by…
-
**Describe the bug**
Fan curve is not detected properly. Fan2go does draw a curve, but at zero the fan is running. Hence it decides stop=min=max=0.
**To Reproduce**
Steps to reproduce the behav…
-
### Device
Novacustom v560TU
### RTE version
--
### OSFV version
--
### Affected component(s) or functionality
Custom fan curve test
### Brief summary
Custom fan curve test fails due to a tim…
-
fan2go is unable to set the fan speed on my system
fancontrol and coolercontrol can do so just fine, enabling the corresponding services one-at-a-time.
But when I do `sudo systemctl start fan2go`,…
-
### Objective
Enable support for some other fan curves to maintain lower fan speeds.
### Initial Implementation Requirements
- options should be selected via configuration
- options should e…