-
Thanks for the good info. Have you managed to find a replacement part for the fan motor? I have an older model, I think circa 2016 that has a Panasonic motor with similar specs. So I would assume I co…
-
## DR-HAF001S does not support Turbo Mode.
Using this preset in Home Assistant results in the fan operating with no fan speed(fan will still oscillate and appear to be on, but with no fan blade mov…
-
-
Is there a way to switch off all fans in standby mode / after printing? I still have fans running in standby mode, but I don't know if it's the motherboard fan or the power supply fan. But when I do a…
-
HA:2024.5.5
Xiaomi Miot Auto:0.7.18
日志: custom_components.xiaomi_miot.climate
来源: custom_components/xiaomi_miot/__init__.py:1412
集成: Xiaomi Miot Auto
首次发生: 2024年5月31日 23:43:10 (38 全部发生)
上次记录: …
-
### Device Infomation JSON File
_No response_
### Detail Informations
Currently, the category for Ceiling Fan Light (fsd) only supports Cool and Warm (CW) LED lights for the HomeKit Kelvin Te…
-
Several users have requested the addition of a motor (or fan)
Unfuddle Ticket [#1778](https://phet.unfuddle.com/a#/projects/9404/tickets/by_number/1778?cycle=true)
> They have asked me to write an…
-
Compare these two delta fans:
https://www.digikey.com/en/products/detail/delta-electronics/ASB02505SHA-AY6B/7491489 (5v from BOM)
https://www.digikey.com/en/products/detail/delta-electronics/AF…
-
### The problem
In some cases action "fan.toggle" incorrect sets the fan speed.
- Just after flashing firmware or reset the device the action "fan.toggle" sets fan state to "on" and fan speed to …
a005 updated
11 hours ago
-
`fan_electric_input_power` was removed from the HeatRejection data group in addressing the Issue below.
[https://github.com/open229/ruleset-model-description-schema/issues/181](https://github.com/ope…