-
```
+ cd /builddir/build/BUILD
+ cd gr-funcube-1.0.0
+ cd x86_64-redhat-linux-gnu
+ make test
Running tests...
/usr/bin/ctest --force-new-ctest-process
Test project /builddir/build/BUILD/gr-fu…
yarda updated
2 years ago
-
I have read #7
Also using my fcdpp with OpenWebRX+
But setting a frequency offset is not the same as setting the ppm correction which is passed to soapy_connector with the -P parameter.
At the …
-
I don't think this is really a duplicate of #509 although certainly related, and the symptoms are worse, IMO.
I have 3 copies of FoxTelem V1.07y running, all on the same machine. Only one has "Sav…
-
I regularly run three copies (instances) of FoxTelem on the same machine, all with the center frequency for FCDPP set the same, so I can get 3 different satellites potentially at the same time if they…
-
After installing Ubuntu 22.04 LTS and installing gqrx ("gqrx-sdr") from the repositories, gqrx crashes consistently on startup. It worked fine on 21.10. The SDR is a Funcube Pro+. Starting from the co…
-
On some systems, the kernel driver will erroneously report "not enough bandwidth" when the Funcube Dongle Pro+ is attached to a USB2 or USB3 port, leaving the fcdpp unusable.
To check whether you hav…
csete updated
2 years ago
-
In windows7 Funcube Pro plus dongle is recognized as an audio device.
Using Zadig does not help either.
Any ideas ?
-
The frequency correction set in GQRX to an FCD or FCDPP is only applied as integral ppm values, such as 1ppm, 2ppm, 3ppm &c. The consequence of this is that at 1296MHz, the compensation is quantised t…
-
```
Third party reported that sweep progress dialog fails in OS X 10.8 with
java.lang.Error: iconv failed.
Trace is:
[STDERR 8.7.2013|2:44PM] Exception in thread "Thread-3"
[STDERR 8.7.2013|2:44PM] …
-
Funcube plus on Rasperry Pi 4 on OpenWebSDR+
The demodulation mode changes but not the frequency when changing bands, the 1st RX frequency stays and does not change. I have to disable the funcube…