-
Field weakening (and other features) can be very dangerous if badly tuned.
The VESC doesn't know what the hardware limits are and as such, an end-user could set it to high values resulting in the E…
Buzut updated
10 months ago
-
Hi mate. Is it possible to get field weakening in your firmware?
-
### Scooterhacking Tool
Firmware (SHFW)
### Type of feature
Other
### Priority
low (take your time)
### SHUT Version
n/a
### SHFW Version
n/a
### Scooter model
Ninebot G2
### Description o…
-
I am currently running firmware 6.4.5E with the BBSHD BAC855/NXT/72V battery and noticed that I get a lot of RPM fluctuation at constant throttle position once Field Weakening is activate. This proble…
-
### Variant
HOVERCAR
### Control type
FOC
### Control mode
Torque
### What can we do to make the firmware better?
Ability to enable the field weakening (FIELD_WEAK_ENA) on the fly when both ped…
-
Hi I am working on bbshd controller to run 72v but i cant find any display that has max voltage more then 60v except eggrider. Is it possible to make a firmware to allow to run 72v true one or few baf…
-
My impression is that `ui16_wheel_speed_x10` changes slowly and one of the side effects is that 25kph [speed limit](https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/blob/master/src/controller/ebike_ap…
-
Hi Emanuel, thanx for your great work ! 😉👍
I have an issue, and other people have also noticed the exact same symptoms.
I use the skateboard variant, in torque mode, with a RC remote control and…
-
All I can get, no matter what I do is 170W of power at 0 RPM with 80 amps. RT data shows 10% duty
tried 6.02 and 6.05 firmware, all types of sensored and sensorless operations, disabling/enabling ph…
-
I'm riding a C4 and installed Unleashed and wrote the following settings to the bike:
- Speed Limit off
- Field Weakening 15%
With these settings I easily speed up to 35km/ph. But once I stop putting…