-
### Printer model
Prusa XL 2T
### Firmware version
6.1.3+7898
### Upgrades and modifications
Enclosure + Highflow Nozzles
### Printing from...
Prusa Connect and USB-Drive
### Describe the bug
…
-
Hi.
I have a warmup sequence that uses PAUSE before print actually starts. After updating my settings to use HH PAUSE/RESUME and PARK features, I'm getting this error when I try to start a new print …
-
### Printer model
MK3.5s
### Describe the feature
Hello, I have a Prusa MK3.5s with LGX Shortcut Extruder from Bondtech.
The path between the hotend and the extruder gears is very short. This is w…
-
Hello,
I have an unusual problem with the G2E and random clogs. I'm currently using a very "soft" PLA filament (Noname). It happend with "matte" filament too. My spring tension is at an absolute mini…
-
If the User modifies the Feed Rate during a print, and then tries to change filament for the next print, the Load/Unload extruder speed is being multiplied by that same factor.
At 200%, for insta…
-
### Bambu Studio Version
1.10.0.89
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 11
### Additional system information
Processor Intel(R) Core(TM) i7-14700…
-
### Bambu Studio Version
1.10.0.89
### Where is the application from?
Bambu Lab Official website
### OS version
Windows 11; Version 10.0.22631 Build 22631
### Additional system infor…
-
### Printer model
MK4 with MMU3
### Describe the enhancement
Requested enhancement:
When the MMU detects that the filament has run out, the printer continues printing till the extruder filament se…
-
The geometry of Protoxtruder is spot on, where if the idler sits flush against the extruder body, the bite depth should be sufficient for any use case.
However, due to the nature of plastic parts, th…
-
### Printer model
MK4S
### Describe the enhancement
Right now with the new MK4S fan strength and direction when I'm doing an M600 filament change the ramming extrusion and the purge extrusion is bl…