-
with latest astir13/SoftRF release, flarm compatibility seems lost, other planes cannot see the astir13/SoftRF anymore, and a firmware upgrade seems indicated.
-
Just built the latest version, FLARM TX seems to work and is received both by my OGN station as well as a SoftRF T-Echo. Unfortunately the same SoftRF is not received by GXAirCom ...
-
FLARM introduced a new Range Analyser feature in Firmware Version 6.80. Antenna Range is now computed inside the device and a permanent statistics is maintained within the FLARM.
This is the discri…
-
Hi,
I have installed ogn2dump1090 (https://github.com/b3nn0/ogn2dump1090) and in tar1090 the OGN-traffics shows up as MLAT. But the traffic is not shown in VRS. ogn2dump1090 injects the traffic via…
-
Receive Flarm NMEA datastream on RS232 jack and merge these packets into outgoing NMEA datastream created by the LARUS sensor.
This would facilitate showing Flarm targets and Flarm warnings on connec…
-
1. Stratux version:
2. Stratux config:
SDR
- [ ] single
- [X ] dual
GPS
- [ X] yes
- [ ] no
type:
AHRS
- [ X] yes
- [ ] no
…
-
1. Stratux version:
2. Stratux config:
SDR
- [ ] single
- [x] dual
GPS
- [x] yes
- [ ] no
type:
AHRS
- [ ] yes
- [x] no
po…
-
In competitions pilots need to be able to set a "Pilot Event Marker" and record it using their IGC-logger. If the logger is a Power-FLARM, a NMEA-Sequence "$PFLAI,PILOTEVENT*..." shall to be sent to i…
-
Hello Matthew,
I was able to decode the provided example file with my RPi3, so gr-ogn seemed to work well.
Unluckily I was not able to decode some live signals.
After some negative experiments - …
dc2mw updated
7 years ago
-
XCSoar versions having and not having the problem
-------------------------------------------------
Which XCSoar version are you using when seeing the problem? latest stable and experimental versi…