-
-
## Description
Using the `./dosdcard.sh` script from the tegraflash bundle fails to create partitions on an SD card with the following error message
```bash
$ sudo ./dosdcard.sh /dev/mmcblk0
...
Ab…
-
While following the instructions on [software-setup page](https://docs.tenstorrent.com/syseng/latest/softwaresetup.html) for installing drivers on Grayskull card,
I tried to flash the firmware with th…
-
### Is your feature request related to a problem? Please describe.
The way clozes work now is you can only remember one item from a list per card, or all of them at once. In my opinion this feature i…
-
opl stopped running games, the opl elf file itself was in the memory card, when starting games the purple screen, nothing happens next, but if you run opl from a flash drive, then the games start and …
-
### Discussed in https://github.com/jajunk/LightHouseLinuxMasterMDFiles/discussions/13
Originally posted by **Murder-Junkie** August 8, 2024
"Murder Junki" hase an Idea for a flash card learn…
-
No LEDs after flashing Pwnagotchi image onto SD card
I have assembled the hardware of my Pwnagotchi. I'm using a Raspberry Pi Zero 2 W with a WaveShare v2 screen. I have flashed the Pwnagotchi zi…
-
When moving the camera around the terrain, I occasionally see random flashes. They occur on average about every five minutes during gameplay. The flashes of light usually appear around a black dot.
…
-
Flashed the SD card using Balena Etcher to v1.3.0. The unit is stuck on Auto-Update screen. Tried power cycling it, no success.
-
### What is the issue?
My cards is w7900, and rocm driver is 6.3 , I found the llama-cpp server started by Ollama always without -fa flag.
I check the code , found :
…