-
I have original Flic buttons (from 2016, not version two), they work fine with the Flic app on MacOS.
I am running the x86_64 version of flicd using an rtl8761b based USB bluetooth adapter. I'm st…
-
If flicd crashes the node does not attempt to reconnect to it once it's been restarted.
@Roaders any reason for this? It means that you have to restart Node-RED if there is an issue which is a pain…
-
I've been running flic buttons for 2 years, with occasional need to reboot because of flic buttons were "disconnected". Then about two weeks ago all buttons went off-line - not even flashing red when …
-
Hello,
I have a problem to run flicd on my Raspberry Pi 3
0cd90890fd17:/etc/conf.d# cd /root/fliclib-linux-hci-master/bin/armv6l/
0cd90890fd17:~/fliclib-linux-hci-master/bin/armv6l# ls
flicd…
-
In the documentation for Flicd, it states to use "simpleclient" to add your Flic buttons. Where is that located?
https://github.com/50ButtonsEach/fliclib-linux-hci
-
flicd does not work if there's no direct connection to api.flic.io (srsly?)
this (besides issue #59) prevents flicd from working in a LAN which does not allow direct internet connections but only thr…
-
Hi.
I am running HassOs 4.12 on a RPI4 B+
Current Version: 0.114.0
Flicd 1.3
Supervisor 231
I have been testing if I could use my Flics in Homeassistant. My initial test was succesful but now …
-
# Bug Report
Flic 2 buttons are not detected by the [images in Docker Hub](https://hub.docker.com/r/renemarc/balena-flic) because they haven't been updated in 2 years, so the flicd is too old.
#…
-
Hello flic team,
Starting the flicd demon is failing on my environment due to the error below.
I'm assuming this desktop version is not compatible - unfortunately, I'm unable to run 15.10 as it's n…
ghost updated
3 years ago
-
hi there,
I can't find a way to launch flicd as a deamon on boot (I'm a on Raspberry PI3).
I have tried the following things (logged in admin) without success so far:
**\- rc.local :**
- I have ad…