-
- Currently we are skipping some FOAK tests because they require CUDA to run, but will be good to enable CUDA in the github actions so that we can run these tests.
- Also we should have some automate…
-
With a few of us getting close to having the DIYFB hardware and Flow benches/Test rigs up and running, would it be useful to implement SCFM conversions in the DIYFB firmware as this would give us a wa…
-
~~- [x] Creation of calibration plates~~
- [ ] Determine flow rates for commonly available saw blades used as orifice plates (16/25/30mm)
- [ ] 3rd party calibration of test orifices
- [ ] Calibrat…
-
MRE has TLE8888+2xVNLD5090
TLE has 6 high-current outputs but those are 4x550 mOhm + 2 or 3 x of 350 mOhm outputs.
2xVNLD5090 gives us 4x180 mOhm outputs.
So while theoretically that's 10 cha…
-
Since deno can run with `--v8-flags=--expose-gc`, it would be nice if `deno bench` also report memory usage.
This feature is very handy when refactoring some code using Weak* object.
The flow woul…
-
The "GUI Firmware updates now possible" is great feature, but I think we need the ability to select all sensors at GUI configuration because firmware.bin files will be compiled with all default senso…
-
GDI4 flow bench tests, turning self-stim on and off via rusEFI console
got random "CRITICAL error: PWM nesting issue 20230816@proteus"
-
Include 'MODE' for averaging function for flow value smoothing
Suggested by @black-top
-
* at the moment GDI4 behavior changes at 18A commanded peak current: we have linear change of behavior up to and including 17.9A and then it falls off the cliff at 18A peak commanded
* in reality tha…
-
# Bug Report
## Description
- clicking Start using Status button
- clicking Next button during onboarding after setting up profile image
- clicking Authenticate button when doing syncing devic…