-
Hello,
I try to communicate with FLUKE RPM4 using GPIB-USB-HS on CentOS8 and I installed pyvisa-py and linux-gpib. Here is the output of PyVISA.
 but not on current master
If you disable wifi, it won't ever connect to pc, and if you enable it - it will connect through wifi regardless of manual ip settings.
Can't seem…
-
Can you share a schematic?
That link is dead.
Tgank you.
-
After fixing https://github.com/GrapheneOS/os-issue-tracker/issues/4139 (thank you!), I have a new error and that is Android Auto constantly disconnecting and successfully reconnecting. I suspect that…
-
In latest FreeBSD releases, *some* NVMe SSD devices are now listed as `/dev/nda[N]`.
https://man.freebsd.org/cgi/man.cgi?nda VS https://man.freebsd.org/cgi/man.cgi?query=nvd
The effect is that the…
-
Hello,
I was working on a test for a device (LadyBug LB5918A Power Sensor) and decided to use python source code that a peer had already written to communicate with it. The code was only tested in …
-
## Expected Behavior
When I try to select a firmware from the dropdown from the firmware page, I shouldn't get interrupted even if `One or more vehicle components require setup prior to flight.`
#…
dwiel updated
5 years ago
-
My thermometer does not connect via BLE. The connection keeps breaking. I have tried different browsers and devices. Even with new batteries it does not work.
Are there any instructions on how to fla…