-
I have a 4 in 1 RM TX16s and an RM Pocket with a 4 in 1 module. I have set up the wireless trainer facility successfully in both directions i.e TX16s to Pocket and Pocket to TX16s by swapping the 4 i…
-
the flysky fsi6 works, but the switches dont really work. the first switch is triggered when the joystick moves and you cannot set the potentiometers so servos dont work well since they are constantly…
nqwoq updated
2 months ago
-
Flysky BS6 receiver doesn’t work correctly.
Channel 1 only operates in one direction with or without channel mapping.
Disabling channel mapping and moving the Aileron output to channel 3 works …
-
Is it possible to port this build to the flysky i6s? The two controllers use the exact same processor but the i6s has a touchscreen instead.
I have attached below some images of the internals.
![f…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
My…
-
see https://discord.com/channels/1005096100572700794/1163909355234656267/1268134779619115061
excerpt:
"numerous EdgeTX supported color screen radios that use other resolutions than 480x272 pixels …
-
Is it possible to add support for cloning the FLYSKY AFHDS2A protocol? I've successfully cloned Frsky transmitters and that works. It would be great to extend this to use Flysky to enable me to bind …
-
### Describe the bug
The FLYSKY EL18 script screen cannot be displayed in all portrait orientations.
![Uploading EL18 with 2.2.5.jpg…]()
### To reproduce
![EL18 with 2 2 5](https://github.com/us…
-
Thank you for this informative github repository & responses in issue #12
Would be great to know if FlySky finally included your fix in the 2022/5/18 firmware v. 1.0.52.1442
https://www.flysky-…
-
how to change the protocol for flysky i6...
need the ino file