-
> I'm going to try powering up the board on the bench. I have a *really* old board purchased as a spare some years ago when I looked at this issue before. I have "modified" it extensively. It may not …
-
```
==RfCatYS1CCBootloader.hex building==
sdcc -Iinclude -DBUILD_VERSION=`../revision.sh` --xram-loc 0xF000 --code-loc 0x1400 appFHSSNIC.c chipcon_usb.rel chipcon_usbdebug.rel chipcon_dma.rel bootl…
-
I'm having difficulty tuning in (any) strong local broadcast FM station using rx_fm (rx_tools f562c5d8829bafebfb5a5204c0e89a9b5a8ddc1f) and an SDRplay RSP2. The audio is somewhat copyable, but sounds…
-
Hello,
as I am lacking a stock V2 firmware and have only V1 board firmware downloaded, and I won't have much time in following 3 weeks to play with the decompiled V1.08 firmware, I wanted to let you …
-
I was wondering if there might be a possibility of adding an I2S decoder to the current decoders that are available. It is a three wire, serial com specifically used for audio applications. It very …
-
Hello phdlee,
I discovered your firmware here on github almost by chance. since I have a k5 dedicated to testing and a si4732 in the drawer, I'll try to put it in place of the original chip! I just h…
-
Hi, I'm Denis (K0TX) - a ham behind [digirig project](https://github.com/softcomplex/digirig).
The interface's sound card works with APRSDrooid, but there is also a serial COM port that allows PTT by…
-
Referencing comment https://github.com/skuep/AIOC/issues/11#issuecomment-1414191015_
> I like "Auto-PTT". Nice! Before implementing this feature I would like to add a HID endpoint for configuring the…
-
I'm trying to run the install.sh on a Rpi4 4GB
…
-
# 总结
## 文档
- [英文](http://www.ti.com/lit/ug/swcu185d/swcu185d.pdf)
- [中文](http://www.ti.com.cn/tool/cn/SIMPLELINK-CC13X2-26X2-SDK)
- 中文文档:http://leconiot.com/download/cc2640r2f/leconiot/cc13x0_cc26…
cisen updated
4 years ago