-
This would allow Robot36 to directly [capture audio](https://developer.android.com/media/platform/av-capture) from another app running on the phone instead of relying on the microphone and speaker to …
-
I'm having difficulty tuning in (any) strong local broadcast FM station using rx_fm (rx_tools f562c5d8829bafebfb5a5204c0e89a9b5a8ddc1f) and an SDRplay RSP2. The audio is somewhat copyable, but sounds…
-
After installing the drivers and running the following two commands:
sudo echo 1 >/sys/class/cxadc/cxadc0/device/parameters/vmux
timeout 10s cat /dev/cxadc0 |pv > CX_Card_28msps_8-bit.u8
I get …
-
I am trying to replace rtl-fm with rx_fm on a Raspberry Pi 3B in order to benefit from improved tuning frequency accuracy and access to all Soapy-supported devices.
Running 'rtl_fm -M wbfm -f 88.…
-
Could we not use an oscilloscope and a logic analyzer connected to a computer to do the same thing here?
-
I'm seeing inconsistent operation of the transmitter in which no audio is present, even though the RF drive is present. I confirmed this by looking at the RF signal at the gate of the MOSFET in AM mo…
w9ran updated
3 months ago
-
Update the integration of wbfm demodulator type to work in this fork; lordmorgul will work toward a pull request for this.
-
What output Impedance could I expect from Raspberry when I am transmitting with FM on VHF frequency 145Mhz (Ohm)?
-
I have been on a journey for a while now to find a good capture solution for Mac and this is the best that I've found so far. Actually it surpasses my expectations for the most part. I do own some b…
-
Instead of using the CAT connection, connect to the Flex radio via the TCP and UDP interfaces.
This allows finer control of the radio plus the ability to put spots and bandpass entries on the PamAd…