-
**Is your feature request related to a problem? Please describe.**
no
**Describe the solution you'd like**
Please add support for Foxess
**Describe alternatives you've considered**
n/a
**A…
-
**What kind of device or service would you like to see an adapter for?**
Fox-ess Inverter
**Is the device connected to the internet or only available on a local network?**
It is connected to the …
-
In Inverter Settings "communications" ensure Ethernet is set to "DHCP". This reveals 3 settings which must match your Modbus logging device set up as follows;
IP (LAN) Address: 10.10.100.254
Subnet …
-
Hello everyone and thank you for the integration.
For some time now, Foxess sensors do occasionally show the status 'unknown'. After some time (up to 1 hour) everything works fine again. During thi…
-
**Describe the bug**
Occasionally the consumed battery on the energy dashboard goes negative, as seen in this screenshot (in green) at 12:00, 14:00 and 17:00
![image](https://github.com/user-attac…
-
## Version of the custom_component
## Configuration
```yaml
Add your logs here.
```
## Describe the bug
When looking at the integration in HA it is showing Not Loaded. I've attached a screensh…
-
PoS for fox-ess
https://github.com/StealthChesnut/HA-FoxESS-Modbus
https://github.com/rsaemann/HA-FoxESS-H3-Modbus
https://community.home-assistant.io/t/foxess-inverter-modbus/459313
https://pl…
-
My inverter (H1-5.0E-AUX) registered a 10 minute grid voltage fault yet this (otherwise fabulous!) extension doesn't show it. In fact the entity inverter_fault_code claims that the last update was th…
-
Hey,
i've set everything up, but don't get any readout from UART.
I think it might be related to the foxess firmware version.
what is weird is, that i dont have a foxess wifi dongle but an "ana…
-
## Version of the Custom Component
v.1.10.0b4
## Configuration
```yaml
Standard install - H1-5.0-E Inverter connected via Ethernet
Master Version: 1.48
Slave Version: 1.02
Manager V…