-
Hello,
i tried using this project for Programming a custom artix-7 board via a J-Link Programming Cable.
I installed it in my msys2 with command "pacman -S mingw-w64-ucrt-x86_64-openFPGALoader"
…
-
Hello;
I want to do your project http://www.instructables.com/id/Digital-Oscilloscope-using-Digilent-Zybo-Board/#step5
But I have these errors in mem_control.c
`Description Resource Path Location…
-
I think It will be interesting for the user to expand the possibilities of programming of your RPGA-Feather FPGA Development Board.
I am so enthusiastic of Lattice FPGA boards that I just added…
-
Currently, the method for programming the FPGA on the Arduino Vidor is:
1. Use Intel Quartus to do the FPGA development
2. Obtain a bitstream
3. Paste the bistream into the header of a specific Ard…
-
I got new TE0712 modules. On a working setup, I replaced an old programmed modules with the new module. I could load the bitfile to FPGA, and the board worked as expected until reboot/repower. Then …
-
https://github.com/trabucayre/openFPGALoader
-
The current method for programming registers is far too confusing. We build hex packets send them to the FPGA using python. Reading register numbers in hex and converting them to decimal in your head …
-
When we use the JTAG programmer to download the fpga.bit file to the Alveo u50, the server will automatically restart. After restarting, the lspci will not be able to locate the board, and the blue li…
-
Hi, and thanks for this cool project. I have build the hardware and programmed the MCU und FPGA. Everything worked fine until the test procedure.
I got 0.00 MB/s at the transfer speed, and i have no…
-
I need to program some (older) FPGAs that are not included in the device list. I tried adding the devices to `device_list.txt` and I was able to detect it, but I was not able to assign the `-X paralle…