-
Hi, any way to see energy in Watts?
-
At the moment, it is very cumbersome to set frequencies of multiple devices, especially with higher frequencies since the frequency selector cannot be edited directly. It takes a long time to reach th…
-
### Boards
AMB82-Mini
### External Hardware
NONE
### Hardware Configuration
Using PWM
### Version
latest dev (checkout manually)
### IDE Name
Arduino IDE 2.3.2
### Operating System
Windows
…
-
firstly, thanks for your work on this subject.
I was looking to replace the PCM5102a with a better dac. I noticed that the STM32F411xE configuration could provide the masterclock. what would the fre…
-
Hello, would it be possible to add the following frequencies for the new training mission?
Land/Launch
Departure
Strike
Red Crown
Approach Alpha
Approach Bravo
Airwing Common
Squadron Common (…
-
Hi the Frequency display in sm2 does not follow the radio for me.
-
Good afternoon, dear friend. When I run the test I get the following:
Debug: Measured frequency channel 1: 0 Hz channel 2: 9803 Hz
Debug: Measured frequency channel 1: 5653 Hz channel 2: 9900 Hz
…
-
I'm modifying an existing fluid bed roaster to allow control and measurement using various Phidgets. I'm having an issue controlling the fan with the PWM signal from an OUT1100, in particular the min…
-
I've been trying to understand how to interpret the 'inline' hint section.
If I understand correctly, it only specifies how many times a call instruction is executed during an average execution of …
-
I have been experimenting with "Orange Pi PC" and "TV box v88 mini" with AllWinner H3 and noticed that on the RX and LT builds there are no CPU frequency utilization statistics in the CPU properties, …