-
Hallo Zusammen,
Ich habe einen Vorschlag für einen (möglichen) zusätzlichen Use Case:
Der Fronius WattPilot dürfte die AC-Ströme die vom SmartMeter übermittelt werden für das Load Balancing verw…
-
Moin,
erstmal vielen Dank für die Integration!
Leider wird der Growatt mit meinem Fronius zusammengelegt in der Übersicht in der Remote Konsole. Also die Summe der Werte Stimmt.
Unter E…
-
Doesn't work with Victron Venus 2.8x. 2.80 provides only Python 3.
-
Hey ,i'm Peter from Germany ,sorry for my bad English
I had IOBroker on an Raspberry Pi 3 B+ running ,and with the Modbus adapter I communicate with a Fronius inverter, which works very well.
The Mo…
-
If I run the script manually via service/run there isn't any problem (see attached picture).
If it runs automatically after reboot it works for around 10 minutes and the values will not update anymor…
-
In the Homey Energy overview, my Fronius smartmeters appears with negative values for current powerr. As a result, its consumption is not accurately accounted for. How can I address this issue or adju…
-
Hello,
i have an inverter (fronius) and a smart meter.
The smart meter itself is read through the inverter with no problem.
Sometimes, though, i have a AsyncTCP kernel panic fault (i assume it is f…
maxdd updated
4 years ago
-
Iam absolutly unsure what i see here. Can someone comfirm that? I own a 3 Phase System.
https://youtu.be/X68T2uLwG5A
Thanks.
-
The Fronius Smart Meter appears in the device list, but is not displayed as an AC load. The problem occurs with the Venus OS v2.92
-
Hallo zusammen,
wie bereits in #15994 erwähnt, ist die Netzladeleistung des Fronius Gen24 aktuell auf lediglich 100-200 W begrenzt. Es wäre hilfreich, im Reiter "Netzladen" eine zusätzliche Option …