-
Following the instructions here: https://broadcom.github.io/AFBR-S50-API/e2studio.html
I installed the latest version v5.4.0 of FSP with e2Studio 2024-04 from here: https://github.com/renesas/fsp/rel…
-
Hello again,
after applying the workaround described in #357 concerning the include paths, I get an issue on the linking phase:
```
[1/2 50% :: 0.008] Linking C executable VEBO_RA4T1.elf
FAIL…
-
Following #249, this issue aims to keep tracks on progress on full system policy (FSP) integration.
The architecture overview can be found on the documentation: https://apparmor.pujol.io/full-syste…
-
Hello!
I just got installed FP650 device on my desktop. And NUT well recognized it with nut-scanner. Device is working, reporting current load, battery voltage, allow to switch beeper off and on.
…
axet updated
2 months ago
-
Hello,
I found a forum thread that pinpoints this problem but it doesn't let me reply to it so I'm posting this here
https://community.renesas.com/mcu-mpu/ra/f/forum/34016/adding-additional-sour…
-
Figure 41 of the API services definition document contains an error that should be correct.
**How to spot the error?**
1. Click on the following [link]((https://docs.mojaloop.io/api/fspiop/v1.1/ap…
-
I am trying to fit SEDs with nebular line emission and only a few of the lines are being with prospector. Even with the ones that are fit, the continuum is much higher than the fsps generated SED tha…
-
[stock-taeko.txt](https://github.com/MrChromebox/firmware/files/15366293/stock-taeko.txt)
[fulluefi-taeko.txt](https://github.com/MrChromebox/firmware/files/15366295/fulluefi-taeko.txt)
12th ES CPU,…
-
## Bug Report
BSOD caused by ReadDirectory. Looking at `FspFsvolQueryDirectoryCopy`, I'm not seeing any input validation of `NextOffset`, though perhaps I'm just missing it.
### How to Reproduce…
-
Hi Mitchell, here is a checklist for going through your docs. I'll go through what you have and leave comments underneath.
---
# Wiki Page Home
- [x] Is the first page you see upon entering …