-
Hello,
would it be possible to implement the Funcube Pro+ key in your next update?
-
Dennis, are there any plans to add support for the FCDP+ in the future?
73, Robert
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…
-
```
+ cd /builddir/build/BUILD
+ cd gr-funcube-1.0.0
+ cd x86_64-redhat-linux-gnu
+ make test
Running tests...
/usr/bin/ctest --force-new-ctest-process
Test project /builddir/build/BUILD/gr-fu…
yarda updated
2 years ago
-
I use funcubing alot to host comps where me and my friends have alot of fun. However one thing that doesnt help is that, the competition mainly only supports the Russian Federation, could you make it …
-
If funcube dongle is configured in gqrx right after starting a message appears: "boost::too_many_args: format-string referred to fewer arguments then were passed - Please select another device". Funcu…
-
The frequency correction set in GQRX to an FCD or FCDPP is only applied as integral ppm values, such as 1ppm, 2ppm, 3ppm &c. The consequence of this is that at 1296MHz, the compensation is quantised t…
-
On some systems, the kernel driver will erroneously report "not enough bandwidth" when the Funcube Dongle Pro+ is attached to a USB2 or USB3 port, leaving the fcdpp unusable.
To check whether you hav…
csete updated
2 years ago
-
Signals with narrow bandwidth like CW and also 1200 BPSK (Funcube) are harder to decode due to the doppler shift and the rather high change of center frequency in relation to the bandwidth.
So it i…
-
Funcube plus on Rasperry Pi 4 on OpenWebSDR+
The demodulation mode changes but not the frequency when changing bands, the 1st RX frequency stays and does not change. I have to disable the funcube…