-
### The problem
The HA changes the the time of Gardena 1889 after phone connection was performed.
I live in TZ Europe/Warsaw. Currently its (due to daylight) GMT+2.
I have proper TZ set in …
-
Hi,
I've opened a ticket at Home Assistant but I'm not sure if this isn't more correct place to report it:
https://github.com/home-assistant/core/issues/121687
In short:
- HA (and most likel…
-
### Feedback
Hi!
This page states that the Gardena Bluetooth integration is compatible with Gardena's 1867-20 Soil Moisture Sensor, which doesn't seem to support bluetooth based on Gardena specs (…
-
Configuration node works fine and apparently finds the location, yet in the mower node it issues "Failed retrieving Gardena Mowers". It's a Smart Sileno 1600 if at all that matters.
-
### The problem
I have installed the Water Computer from Gardena and successfully connected it to my HA running on Intel NUC 7 with the internal Bluetooth module. Unfortunately, ever since the device…
-
Hello, I noticed the following: After about 3 hours I can give commands to the mower, but I no longer receive any status messages. Only a deploy from Node Red solves this! Can a timeout be set up for …
-
### The problem
The Integration find itself the "Water Control Bluetooth" equipment. But it always ends with an error :
No devices or entities found
### What version of Home Assistant Core has t…
-
py-smart-gardena is using the official documented Gardena-API from the Husqvarna website
https://developer.husqvarnagroup.cloud/apis/GARDENA+smart+system+API
which ist based on REST and websocket co…
-
According to https://www.openhab.org/addons/integrations/homekit/ a valve can have a Valve.Name characteristic. But when the valve is part of an irrigation system, this name characteristic is missing/…
-
Dears,
I recognized a few days ago that the Gardena integration is not available any more.
Within the integrations its listet as "not loaded" as attached. Reboot or any other action does not show …