-
This is probably impossible, but Ill ask it anyway:
It is at all possible to employ Slic3r to look at a piece of gcode and perform modification operations as defined by the {if [current_extruder]} …
-
Hello i receive this error when i'm budling the firmware with Auto build marlin in Visual studio code.
Marlin\src\gcode\parser.cpp:199:11: error: 'gDebug' was not declared in this scope
199 | …
-
I had a probe routine crash the GUI. After a reset I was stuck with this state. I was trying to send
`g91 y-1`
![image](https://user-images.githubusercontent.com/20271/82758589-3d78b000-9d9c-…
-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
It's common that a bed mesh can change depending…
-
Hello. The printer stopped printing with the note "Canceled". After reviewing the console output, I found that it gave the following information: Unable to parse move 'G1 **X-2-4.909** Y-23.009 I-.678…
-
### OrcaSlicer Version
2.2.0 nightly
### Operating System (OS)
Linux
### OS Version
Ubuntu 24.04 LTS
### Printer
Original Prusa XL 5T
### Expected results
M104.1 is NO…
-
First of all, the project is well-coded and super easy to modify with further customization. But there is a problem for the UGS connection after building the project. The console returns as follows:
…
-
Loading gcode from sketchucam, renders some G1 moves in Green
![sketchucama](https://cloud.githubusercontent.com/assets/7695323/24818327/58a2bea2-1be0-11e7-80f4-54bfbee504c7.PNG)
(Yes I know …
ghost updated
7 years ago
-
I'm tried to use Geany as NC file editor, but stuck within full lack of GCode support and looks like current syntax parser not even able to do this properly. As example this is how *.nc files shown in…
-
### Is your feature request related to a problem? Please describe.
Don't think so.
Code says not to wait for the heaters. But, it waits for the hotend, then the bed.
Should be the bed, then the…