-
### Feedback
I appear to observe that if the generic thermostat is calling for a higher temperature than the temperature sensor measures, it switches the switch on and goes to "heating" mode, all a…
-
### Feedback
I want to use the generic thermostat to control a device that does not have a switch. Initially I tried using an input_boolean, but found this is not supported and will not be supported.…
-
### The problem
Generic Thermostat - cycles if both tolerances are zero and the current temperature = target temperature.
I am using the Generic Thermostat to control my UFH. I want the thermostat…
-
I have two Trane AC Thermostats with z-wave connections to wink. If I adjust the temperature up or down 1 degree on HomeKit, it actually adjusts by 4-5 degrees.
-
[Eve Thermo](https://www.evehome.com/de/eve-thermo) v2 and v3
### Description
Home Assistant does not respond anymore.
### Steps to Reproduce
Sometimes it happens when setting the temperat…
-
### Prerequisites
* [ ] Model name of your Devices
- Bosch [BTH-RA](https://www.zigbee2mqtt.io/devices/BTH-RA.html#bosch-bth-ra)
- Generic Zigbee Thermostat [GS361A-H04](https://www.zigbee2mqtt…
-
I have a thermostat which returns the humidity only in DPT14 (generic 4 bytes float). Is it long to implement this? What's the file to modify in case I want to try implement it?
-
I have three, one Nest thermostat and two created with the generic thermostat integration. The Nest thermostat does not appear as a device either.
-
Hi,
I'm trying to make a PID climate thermostat using your code. As far as i know the homeassistant generic thermostat is just a basic on/off thermostat. I tried to use the esphome PID climate comp…
-
First off, great job on this project!
I've noticed this in your README:
> Gree unfortunately doesnt support a "current temperature" on its own.
However I found:
> some ACs report current room …