-
### Component
Dasharo Tools Suite
### Device
NovaCustom V56 14th Gen
### Dasharo version
_No response_
### Dasharo Tools Suite version
1.2.23
### Test case ID
_No response_
…
-
我的设备是 360t7,搭载的闪存是 GigaDevice 的 5F1GM7UEYIG,到手的官方固件版本号为 v4.2.4.8002 该版本无法通过 ttl 开启 telnet。于是我降级到了 v4.2.4.7959,结果和这个芯片的分区表不同,然后就陷入无限重启。
我通过 mtk_uartboot 把 fixed-part 的 uboot 加载到内存里然后启动,能成功进入自定义 uboo…
-
Hey, I'm trying to look through the datasheet to spot the differences between 25B/25Q series so I could maybe try and see if I can bodge a patch for flashrom. Any help would be greatly appreciated!
…
-
Hello
There are boards populated with STM32F103 substitute from GigaDevice
https://www.gigadevice.com/product/mcu/arm-cortex-m3/gd32f103c8t6
It refuses to flash more than 65K
Is there any way to …
-
## Introduction
There is community interest to add support to GigaDevice SoC Vendor in Zephyr. Community members have intentions to support both ARM and RISC-V SoC's. This RFC was opened to serve a…
-
Unless I'm mistaken.... It seems to be lacking support entirely for the smaller chip.
And perhaps it's just me but the larger chip although being detected as an identified chip, regardless of what ch…
-
### Description
can you add the support for GD5FGQ4UB91G ? these family nand is supported in SNANDER
### Usage tips
* Please use the 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to…
-
Hi
Please Add Support For GigaDevice GD25Q64CSIG or GD25Q64(C)
My Device Breaked After Flashing By Flashrom , it reconized it as GD25Q64(B) and My Flash goes empty
-
I started porting tinyuf2 (great project!) to the RISC-V GigaDevice GD32VF103 on the Sipeed Longan Nano Board, which has supposedly the same USB OTG peripheral as the STM32F105/107 or STM32F4s. Flash …
-
Can you please share your cfg file for openocd. I used stm32f1x.cfg on GD32F103C8 but unsuccess.
Also, gd32f103.dap 0x4 0x00 can the command be replaced with stm32f1x.dap 0x4 0x0?