-
**Describe the bug**
This is not Predbat driven, but perhaps could be accommodated as part off the data filtering. I've recently noticed that if I restart HA, I momentarily get spikes or drops on va…
-
Hi.
In the GivTCP Inverter Details section I have some strange readings. I have a few Unknowns -
GivTCP Battery Priority
GivTCP DC Status
GivTCP Inverter Time
GivTCP System Mode
GivTCP Inver…
-
**Describe the bug**
Recently #1204 was fixed to correct the value of predbat_load_energy_h0
I think there may be a problem with other h0 sensors as well:
predbat_import_energy_h0 (how I spotte…
-
**Describe the bug**
If predbat is on hold charging it sets ‘pause discharge’ via GivTCP. When it moves to the next slot if force discharging is planned it does not unset pause discharge and so the b…
-
**Describe the bug**
I have added the new pv daily prediction chart and it works except for the PV output line (orange) that is just a flat line.
I made sure the sensor was correct (format - senso…
-
I have an AIO, and GivTCP returns `number.givtcp_SERIALNO_battery_charge_rate` and `...discharge_rate` as both being 6kW. Looking at actual experience reported by GivTCP my battery is actually dischar…
-
Sorry if asked before but cannot find predbat_dashboard.yaml.
Installed predbat standalone and also with app deamon. unisntalled and removed the files but cannot seem to locate the file.
Install…
-
Hi. I had an 11kW 3 phase Gen 3 inverter installed at end of February. As far as I can tell GivTCP is not yet able to communicate with the inverter. Is there a timescale of when it will be added to Gi…
-
Hi. I have installed Beta and I have some data. 3 phase Gen 3 inverter plus 6 batteries. Some of the numbers look wrong - Battery Power readings seem 10x too high. Many errors in Log. How can I suppor…
-
Having been working reliably for months (thank you) GivTCP suddenly failed to talk to the inverter last night - it looks like this was just after midnight.
I've therefore:
- restarted the add on
…