-
Are you considering support of GK-200MP2C camera ?
The PTZ works fine for my GK-200MP2B camera, but the same config doesn't work for 2 different GK-200MP2C version cameras.
Thanks
-
Hello, I am running firmware version 0.1.5. Model GK-200MP2B and I cannot get wifi working. The wifi configuration is saved , but wifi strength is 0%. Any suggestions please?
-
After finding this project I bought a GK-200MP2-B in hopes of getting it playing nicely with Frigate (and Home Assistant.) I have it working very nicely so far, but I have been unable to get auto trac…
-
I have looked for other similar posts, there are many similar problems, but I didn't find the solution.
And also if I have tried different ways to make work ptz I wasn't able to do it.
I tried in…
-
I just installed a Sonoff Camera GK-200MP2-B and i'm trying to get motion detected updates but couldn't make it work.
After a getDevices() i get this about the camera:
{ group: '',
online: tr…
-
Hi! thanks for the project!
I am trying to use the hack in a Sonoff GK-200MP2-B, updated with the last firmware, from a clean install.
All work fine, but the ONVIF functionality.
I have it se…
-
Hi! Thank you for your work!
I have the problem that not every command is executed by the camera. I cannot specify it further. Sometimes every command is executed immediately, but sometimes there's j…
-
Can I apply the firmware on a GK-200MP2B with a v28XXXXXX version???
-
GK-200MP2B
sonoff-hack 0.1.2
Firmware:40620220309
I made a factory reset of the camera and copied the sonoff-hack 1.1.2 to the sd card.
- eWeLink makes a connection and works.
- the WEB Interfa…
ghost updated
1 month ago
-
Hi,
After trying to access the web interface several times I found out that the eWelink app says that my camera is the model GK-200MP2C (the box says GK-200MP2B...) is it possible that this is causi…