-
I am unable to get the internet to forward on my glinet mt-1300 router
-
Saved my buttocks. Trying to get nordvpn set up on a wireguard capable glinet router sent me down so many rabbit holes of nonsense and non working "solutions". This was easy to follow, made the file I…
-
- [x] Switch from `sysupgrade` from `tmp` dir to sysupgrade from `bin` dir
- [x] [Find out](https://github.com/chGoodchild/TollGateNostrToolKit/issues/18#issuecomment-2325142257) if compiled sysupgra…
-
the plugin is not availible on a glinet device atx1800 is there a way to add the repository or source ?
-
I am using openmptcprouter on a currently unsupported platform, the glinet mt6000.
Since it is not currently supported I have to manually compile an image every time I want to upgrade.
The Router i…
-
Hi, I have a GLinet with Openwrt installed and I add openfortivpn.
I can connect to fortigate succesfully with terminal command openfortivpn -c ./config
then I have a fortigate and when I'm con…
-
### Describe the bug
hostapd now start with ht_capab=[HT40+] or ht_capab=[HT40-] in the first place, making it unable to setup 40MHz channel when landing control channel in 8n-4 (36,44,52,60) with …
-
Not sure if this is the right place to post this, but here's what I saw:
I am using a gl-ar750s and attempted to add a port forwarding rule using the "beta" admin UI. Everything looked okay, but I …
-
### Describe the bug
Sysupgrade -b can't create a backup - there are two sysupgrade processes, but they don't make anything.
Tried stop wpad - it does not help.
### OpenWrt version
r26802-f637cf…
-
Booting the GL-AR750, I can see that the gpio-based I2C controller is set up with the expected pins 16 and 17:
```
[ 0.147948] gpio-17 (sda): enforced open drain please flag it properly in DT/ACP…