-
Via serial connection, connect to the GQ GMC-500 and get data in CPM in an interval or every second via heartbeat.
[Python show USB](https://stackoverflow.com/questions/8110310/simple-way-to-query-co…
-
When I load the values from my device (GMC-500+Re 2.0), I get as first value an extremely high CPM value.
the following two values are also not correct, since the maximum value in the device has only…
-
I've been using a GQ GMC 320+ V4 to upload data for about 2 months, the map shows:
CPM:25 ACPM:0 0uSv/h
Strangely it does update the CPM just fine. Not the ACPM and not uSv/h.
Is this relat…
-
Hello, I'm hoping the GMC-300 could be supported.
I'm using the latest Ubuntu 22.04 and Python2. I had to adjust several things in setup to appease the errors, but using the -i flag gives no device…
-
Ohai,
I bought myself a GMC 320 Plus (GMC-320Re 4.53). Most of this tools function work on this device and give reasonable output like -i, -o, -O, -G, -T and --heartbeat etc.
But it seems like …
-
The GMC device appears to have moments where it's busy doing something internally and takes a while to open a connection.
On the GMC-600+ re-running `pygmc.connect()` seems to have a ~1-in-8 chance …
-
Windows version, when streaming OBS via webrtc tcp, a connection error occurs
Release v5.0-b6
Steps to reproduce the behavior:
1. Go to 'set config rtc.tcp.only.conf and start obs stream (versi…
-
Currently, `get_usv_h()` is coded simply as `µSv/h = (CPM / CalibrationCPM_1) * Calibration_uSv_1`
However, after recently getting a `GMC-600+` I noticed the uSv/h values a bit off from what I was …
-
[27.07.2023 12:17:29] jasiu-rozowyczlowiek
-
[24.08.2023 12:08:06] jasiu-rozowyczlowiek:
[24.08.2023 12:08:06] jasiu-rozowyczlowiek